OutBack Power MPPT controllers Flexmax - Independent Power for solar, wind, batteries, inverter/chargers and low energy refrigeration products

Go to content

Main menu:

Products > Controllers > MPPT Controllers
 

MPPT CHARGE CONTROLLERS

MPPT (Maximum Power Point Tracking) charge controllers allow your solar modules to operate at their peak output voltage, improving their performance by as much as 30%. The controller harvests power from the solar array at the maximum voltage and converts it down to battery voltage, boosting charging current (Amps) in the process.

Maximum Power Point Tracking controllers are designed for use in larger solar module systems, where the modules are configured in long series strings to maximize voltage and amps output. Some models are designed solely for use with solar modules, while others can be used in solar, wind and hydro systems.

 
 





Specs              Manual











Specs               Manual

 

FLEXmax™ 80 EXTREME
AS/NZS5033:2014 / IEC62109-1 compliant

The FLEXmax Extreme’s advanced thermal engineering provides full power output from  -20 to 45°C without requiring a cooling fan. Because the passively cooled unit can be sealed, circuit boards and other sensitive electronics can be fully protected from dust, dirt, insects, and other external sources of contamination. The FLEXmax Extreme Charge Controller can not only go anywhere, it can also get there faster by saving precious installation time. It is a fitting companion to OutBack’s renowned sealed FX inverter/charger line and demonstrates the company’s ongoing commitment to providing clean, reliable power anywhere it has the potential to transform lives.

  • Environmentally-rated outdoor enclosure

  • Solid-state, passively cooled design for quiet operation

  • Sealed architecture for long-term reliability

  • Easily integrated AXS Card/Modbus/TCP interface

  • Remote battery voltage sense improves battery charging performance







FLEXmax™ 60
FLEXmax™ 80

The OutBack FLEXmax Maximum Power Point Tracking Charge Controllers offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging. The Charge Controller features include:-

  • 80 amps maximum continuous output current up to 40°C without thermal derating for the FLEXmax 80 and 60 amps for the FLEXmax 60

  • Engineered to work with 12, 24, 36, 48, and 60VDC battery voltages

  • Backlit LCD display screen with 80 characters (4 lines, 20 characters per line)

  • Last 128 days of operational data are logged for review

  • Voltage step-down capability allowing a higher PV array voltage configuration

  • Manual and auto-equalize cycle

 
 







 

SCCM10-100    10 amp 100V MPPT
SCCM20-100    20 amp 100V MPPT

AS/NZS5033:2014 / IEC62109-1 compliant


The new SmartHarvest MPPT controllers offer high efficiency, high-yield battery charging technology at a price normally associated with PWM designs.

  • 10 amp/ 100V and 20 amp / 100V versions

  • For off-grid and grid-connected solar power systems with energy storage

  • MPPT regulation ensures maximum yield from the available solar energy

  • Integrated LED display

  • Built-in protection for circuitry for lightning, solar panel and battery reverse current and short circuits


 Brochure SCCM10-100       Manual SCCM10-100
 Brochure SCCM20-100       Manual SCCM20-100

 
 
separator line
 
 

You may also be interested in:-

 
 

Solar Modules:

 


            

 
 
Back to content | Back to main menu