MPPT CHARGE CONTROLLERS
MPPT (Maximum Power Point Tracking) charge controllers allow your solar modules to operate at their peak output voltage, improving their performance by as much as 30%. The controller harvests power from the solar array at the maximum voltage and converts it down to battery voltage, boosting charging current (Amps) in the process.
Maximum Power Point Tracking controllers are designed for use in larger solar module systems, where the modules are configured in long series strings to maximize voltage and amps output. Some models are designed solely for use with solar modules, while others can be used in solar, wind and hydro systems.
SunSaver SS-MPPT-15L 15amps at 12 or 24 Vdc
PV: Overload, Short Circuit, High Voltage
Load: Overload, Short Circuit
Reverse Polarity: Battery, PV and Load
Lightning and Transient Surges
Reverse Current at Night
25 or 40 amps up to 120Vdc open circuit
30, 45 or 60 amps at up to 150 Vdc open circuit
With Disconnect Box (600V; 25A 1-Pole disconnect switch)
With DC Transfer Switch (600V; 30A double pole; double throw DC Transfer Switch)
Pre-wired with Ground Fault Protection Device