MPPT CHARGE CONTROLLERS
MPPT (Maximum Power Point Tracking) charge controllers allow your solar modules to operate at their peak output voltage, improving their performance by as much as 30%. The controller harvests power from the solar array at the maximum voltage and converts it down to battery voltage, boosting charging current (Amps) in the process.
Maximum Power Point Tracking controllers are designed for use in larger solar module systems, where the modules are configured in long series strings to maximize voltage and amps output. Some models are designed solely for use with solar modules, while others can be used in solar, wind and hydro systems.
The KID 30A MPPT Charge Controller 150Vdc
The KID is the most versatile medium-sized MPPT charge controller on the market. Ideal for small renewable energy systems, the KID allows for true input paralleling. As your power needs grow, add more modules to the array, and a second KID. This will give twice the power from a single array. Available in Black or White wall mount or marine version, which comes standard with the mounting bracket, 4ft of flexible conduit, battery temp sensor and extra conformal coating.
True paralleling - Inputs and Outputs for two KIDs
Up to 150Vdc input with Midnite's exclusive HyperVOC extending the input voltage beyond 150 Voc for cold climates
12Vdc, 24Vdc, 36Vdc, 48Vdc battery output
Load/Clipper function user selectable. Clipper function is used on Wind/Hydro and requires an additional Midnite KID Clipper
Lighting Controller: dusk-dawn; hourly; day; night settings
Up to 30 amps battery output with low input voltage based off of PV configuration
Reverse polarity protected
Exchangeable Front panel fuses for battery, input and load/clipper
3 LED bar graph for battery status at a glance
Keypad for access to extensive menu items and set points