IPNZ logo
 09 415 6686
09 415 6686
Go to content

Installation and Electrical Distribution Parts
goldline

DIN & PANEL MOUNT DC BREAKERS



Noark are a high quality range of DC circuit breakers 10A to 63A that are ideal for PV applications in both 500V (2-pole) and 1000V (4-pole) configurations. The 1000Vdc (2x 500V) model is ideal for solar arrays up to 416Voc when designing a system to meet AS/NZS5033.
 MCB-500V-10A
MCB-500V-16A
MCB-500V-20A
MCB-500V-32A
MCB-500V-40A
MCB-500V-50A
MCB-500V-63A
MCB-1000V-16A
MCB-1000V-63A
10A 500VDC
16A 500VDC
20A 500VDC
32A 500VDC
40A 500VDC
50A 500VDC
63A 500VDC
16A 1000VDC
63A 1000VDC
2 Pole Non-Polarised K-Type curve
2 Pole Non-Polarised K-Type curve
2 Pole Non-Polarised K-Type curve
2 Pole Non-Polarised K-Type curve
2 Pole Non-Polarised K-Type curve
2 Pole Non-Polarised K-Type curve
2 Pole Non-Polarised K-Type curve
4 Pole Non-Polarised K-Type curve
4 Pole Non-Polarised K-Type curve
goldline
PV Power
IP65 Breaker Enclosures

Waterproof Solar PV 2 and 4 pole breaker enclosures  to suit the NOARK range of non-palarised breakers
  PV-ENC-4P

PV-ENC-8P

PV-ENC-12P

PV-ENC-24P

PV-ENC-36P
4 pole enclosure IP65

8 pole enclosure IP65

12 pole enclosure IP65

24 pole enclosure IP65

36 pole enclosure IP65
goldline

FUSEHOLDERS & FUSES
HIGH QUALITY EUROPEAN MADE BY OEZ (SIEMENS)






Established in 1941 in Czechoslovakia, OEZ has been serving the electrical equipment market for nearly 70 years. The company´s development  accelerated considerably after 1994 when it passed into  private  ownership. In 2007 OEZ and the Siemens Group signed a strategic partnership agreement.  

We are offering a small selection of their Fuse Switch Disconnector products.






NH00-3P


Fuse Holder - 3 Pole, 160A Max, Size 00

NH1-3P

Fuse Holder - 3 Pole, 250A Max, Size 1

NH000-63A Fuse - 63A Size 000 fits size 00 Fuse Holder
NH000-100A Fuse - 100A Size 000 fits zise 00 Fuse Holder
NH00-160A

Fuse - 160A, Size 00

NH1-100A

Fuse - 100A, Size 1

NH1-160A Fuse - 160A Size 1
NH1-250A

Fuse - 250A, Size 1

NH00-2BB Bus Bar - to connect 2 poles of Size 00 housing
NH1-2BB

Bus  Bar - to connect 2 Poles of Size 1 housing

NH1-2BB-L Bus Bay - to connect 2 Poles of Size 1 housing - long
goldline


DC DISCONNECTS & ENCLOSURES





The MNDC175 Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included. The panel mount plates allow for mounting the 3/4" 125VDC breakers that range from 60 amps to 100 amps. You can also fit the MNDC-GFP80 plus four more panel mount breakers in the enclosure. Another configuration would be one MNDC-GFP, one 3/4" panel mount breaker and five din rail breakers as well as the large 125-250A inverter breaker. Mounting is provided for a 500 amp shunt and a MNTBB-R terminal bus bar. Battery negative stud is included as well as a ground busbar.

Schematic MNDC Plus series

goldline


MidNite Solar offers a range of PV Combiners to accommodate PV systems as small as a two string off grid cabin and up to 16 strings for a 100KW commercial grid tie inverter. The MNPV series of combiners are the result of 20 years of design and manufacturing experience in the renewable energy industry. Each unit has the same quality features such as:

  • Aluminium rainproof type 3R enclosure

  • Internal plastic injection molded dead front covers

  • Knock outs that accept waterproof strain reliefs, conduit or panel mount MC type connectors

  • Knock outs for lightning arrestors

  • Uses 150VDC & 300VDC breakers or 600VDC fuses depending on model number

  • Adaptable for two separate inverters or charge controllers on certain models

PV COMBINERS

 

MNPV3 For 150 VDC charge controllers and 600 VDC gridtie inverters


Gray aluminium type 3R rainproof enclosure with insulating deadfront, will accept three 150VDC (MNEPV) breakers or two 600/1000 VDC fuse holders. Includes a 60 amp plus bus bar, 6 position PV negative bus bar and a 6 position ground bus bar. Punch out tabs on the plastic deadfront make for a clean installation using circuit breakers. An included snap in adapter makes for a professional looking installation when installing fuse holders. A single 300VDC breaker from 7 to 50 amps may be installed as a disconnect (no combining busbar) .


The enclosure may be mounted to a pole or wall indoors or out.

Breakers/fuse holders sold separately

goldline
Independent Power NZ Ltd
32e William Pickering Drive
Rosedale
AUCKLAND 0632

Ph: +64 9 415 6686
Fx: +64 9 415 6685
Back to content