Flojet water pumps - Independent Power for solar, wind, batteries, inverter/chargers and low energy refrigeration products

Go to content

Main menu:

Products > Water Pumps






WATER PUMPS


Small diaphragm pressure pumps run on either 12 or 24VDC are used in caravans, boats, motorhomes or baches where pressurized water is required for domestic use. These Flojet pumps will self prime, and suction lift up to 2.4m.





4325 Series Heavy Duty Pumps

Self-priming diaphragm pump 12v or 24v  available. Flow rates up to 17 litres/min, pressure switch control, capable of pressures up to 2.8bar (40psi). All models include strainer.

  • Self-primes up to 2.4m vertical lift

  • Quick-connect plug-in ports for easy installation

  • Optional pressure nozzle control to run the pump only as needed




3526 Series Triplex Automatic Water System Pump

  • Self–Priming

  • Dry Running

  • Soft Noise Absorbing Mounts

  • Snap–in Port Fittings

  • Built-in Bypass : Less Pulsation

  • Reduces need for accumulator tank

  • Corrosion Resistant Materials




4405 Series Quad DC Water System Pumps

Self-priming diaphragm pump with 12 or 24v  DC electric motor. Flow rates up to 12.5 litres/min, pressure switch control, capable of pressures up to 3.2bar (45psi)

  • Self-primes up to 2.4m vertical lift

  • Four-piston design delivers higher flow rates

  • Quick-connect plug-in ports for easy installation

  • Pressure-switch control to run the pump only as needed




Jabsco V-FLO 42755

V-FLO variable flow, constant pressure water pumps now feature the revolutionary new DiMOND technology designed to automatically diagnose and monitor all aspects of your pump’s performance to prevent system failure. DiMOND incorporates 10 specific modules designed to Monitor, Protect and Prevent – allowing you to evaluate and respond to the problem before the pump or your boat are damaged. The DiMOND technology automatically runs diagnostics to detect common failures such as run dry,plumbing leaks, over current, under current, low voltage and over voltage. If the diagnostic discovers a problem, the pump will stop, identify the root cause, and provide the data you need to solve the problem.

V-FLO is powered by a new variable speed drive that delivers the exact amount of water flow neededto perform a variety of onboard delivery tasks. Since the pump is constantly monitoring water flow and electrical current, it automatically adjusts itself as needed, ensuring that your systems are operating at peak efficiency.


            

 
Back to content | Back to main menu